Aftermarket

thumb_15105365_micro2-fuses-case.jpg

Micro 2 Fuse Assortment (70 pieces $29.99)

$29.99
Micro2 Fuse Assortment in carry case. Micro2 fuses are the new standard for 2013 & up vehicles. For example, the 2013 & up Dodge Ram Trucks use these fuses, along with Ford and GM.Guess with their popularity came a 500% price increase from our vendor! THE
thumb_15105540_M20164.jpg

Bolt 3/4"-10 x 2" (CANADA)

$4.25
Bolt- 3/4 -10 x 2" Grade 5 (CANADA)
thumb_15105127_photo-not-available.jpg

Bolt 5/8"x 3"

$4.25 $4.52
Bolt- 5/8" x 3" Grade 5
thumb_15104788_a-coil-38-th.jpg

"A" Coil (3/8") For Meyer Plow Pumps E-46, and E-47

$19.99 $24.99
This is the older style 3/8" Coil for E-46 and E-47 Meyer plow pumps. The A Coil controls "Lower and Float". Made in the USA.
thumb_15104798_c-valve-th.jpg

"C" Valve for Meyer E-47 - E-60 Plow Pumps

$79.99
"C" Valve for Meyer E-47, E-57, and E-60 Plow Pumps. This is an aftermarket valve, and the Coil will not cover the hex part of the Valve. This is normal and will not affect operation in any way! The C Valve, controls Right Angle.
thumb_15105486_1-pin-loop.JPG

1 Pin Pigtail Loop

$3.00
1 Pin Pigtail Loop. 12" long, 16 gauge wire.
thumb_15105041_1-4-lynch-pin.jpg

1/4" Lynch Pin

$1.50
Used on some Meyer Plow Hinge Pins (Pins that mount plow on truck). Also used to hold in ST and C Series Pivot Pins and make grease fitting access easier.
thumb_15105487_2-pin-loop.JPG

2 Pin Pigtail Loop

$3.00
2 Pin Pigtail Loop. 12" long, 16 gauge wire.
thumb_15105488_3-pin-loop.JPG

3 Pin Pigtail Loop

$3.00
3 Pin Pigtail Loop. 12" Long, 16 gauge wire.
thumb_15105042_3-16-lynch-pin.jpg

3/16" Lynch Pin

$1.00
Used on some Hinge Pins (the pins that mount the plow on the truck). These are 3/16" diameter, and they fit the Aftermarket Hinge Pins we sell here.When replacing existing Hairpin on Meyer Drive Pro, or SOS plows you must enlarge existing hole in Clevis P
thumb_15105364_3-16-lynch-pin.jpg

3/16" Lynch Pins - BULK PACK (100 pcs)

$75.00
BULK PACK of (100pcs) 3/16" Lynch Pins. Used on some Hinge Pins (the pins that mount the plow on the truck). These are 3/16" diameter, and they fit the Aftermarket Hinge Pins we sell here. These 3/16" Lynch Pins have many uses on trucks and trailers as we
thumb_15105416_3-16-lynch-pin.jpg

3/16" Lynch Pins - BULK PACK (200 pcs)

$140.00
BULK PACK of (200pcs) 3/16" Lynch Pins. Used on some Hinge Pins (the pins that mount the plow on the truck). These are 3/16" diameter, and they fit the Aftermarket Hinge Pins we sell here. These 3/16" Lynch Pins have many uses on trucks and trailers as we
thumb_15105417_3-16-lynch-pin.jpg

3/16" Lynch Pins - BULK PACK (300 pcs)

$200.00
BULK PACK of (300pcs) 3/16" Lynch Pins. Used on some Hinge Pins (the pins that mount the plow on the truck). These are 3/16" diameter, and they fit the Aftermarket Hinge Pins we sell here. These 3/16" Lynch Pins have many uses on trucks and trailers as we
thumb_15105418_3-16-lynch-pin.jpg

3/16" Lynch Pins - BULK PACK (400 pcs)

$250.00
BULK PACK of (400pcs) 3/16" Lynch Pins. Used on some Hinge Pins (the pins that mount the plow on the truck). These are 3/16" diameter, and they fit the Aftermarket Hinge Pins we sell here. These 3/16" Lynch Pins have many uses on trucks and trailers as we
thumb_15105419_3-16-lynch-pin.jpg

3/16" Lynch Pins - BULK PACK (500 pcs)

$250.00
BULK PACK of (500pcs) 3/16" Lynch Pins. Used on some Hinge Pins (the pins that mount the plow on the truck). These are 3/16" diameter, and they fit the Aftermarket Hinge Pins we sell here. These 3/16" Lynch Pins have many uses on trucks and trailers as we
thumb_15105490_4-pin-loop.JPG

4 Pin Pigtail Loop

$4.00
4 Pin Pigtail Loop. 12" long, 16 gauge wire.
thumb_15104914_gauge-set.jpg

5,000 psi. Pressure Gauge

$89.99
5,000 PSI Liquid Filled Pressure Gauge, includes adapter to screw in to High Pressure Port on Meyer E-47, E-57, E-58H, and E-60 pumps. Also fits H Models. Adapter will not fit older E-47 units with 5/8" Drain Plugs. It can still be used on them, but must.
thumb_15105115_feb-25-0_003.jpg

6 Pin Pigtail Loop

$9.99
6 Pin Molded Connector Loop. 16ga wire. Cut in the center of loop to have two 6" pigtails. Perfect for repairing snow plow lights. DOES NOT MATE TO Truck-Lite plug. You must splice in both halves of this loop to repair a Truck-Lite plug.
thumb_15104906_swivel.jpg

90 Degree Swivel Fitting 21855C for Meyer E-47 Pumps

$5.99
90° Swivel Fitting 21855C for Meyer E-47 pumps, and Angle Rams on plows equipped with E-47 pumps. One is typically on the pump, and one is on the passenger side angle ram. Photo shows two, price is each! Color may vary, silver or gold.
thumb_15104886_ram.jpg

Angle Ram 1.5" x 10" for Meyer ST and TM Series Plows

$89.99
Aftermarket power angle ram for Meyer ST and TM Series plows. Measures 10" from weld to weld on cylinder. Also fits some C Series plows. Port is 1/4" pipe thread and exits on top of ram.
thumb_15105080_10in-ram.jpg

Angle Ram 1.5" x 10" Cross Drilled for Meyer ST and TM, Lot Pro, and Drive Pro Series Plows

$109.00
Aftermarket power angle ram for Meyer ST and TM Series plows. Measures 10" from weld to weld on cylinder. Also fits some C Series plows. Port is SAE thread and comes with 1/4" NPT adapter. READ FULL DESC
thumb_15105034_12-ram.jpg

Angle Ram 1.5" x 12" for Meyer C Series Plows

$99.99
Aftermarket power angle ram for older Meyer C Series plows. Measures 12" (approx.) from weld to weld on cylinder. Port is 1/4" pipe thread and exits on top of the ram.
thumb_15104895_STCboltkit.jpg

Angle Ram Bolt Kit for C Series Meyer Plows

$15.99
Bolt Kit for Angle Rams on C Series Meyer Plows. Includes 4 bolts, 4 Nylock Nuts, and 2 Washers.
thumb_15104956_st-bk.jpg

Angle Ram Bolt Kit for ST Series Meyer Plows

$15.50
Bolt Kit for Angle Rams on ST Series Meyer Plows. Includes 4 bolts, 4 Nylock Nuts.
thumb_15104957_tm-bk.jpg

Angle Ram Bolt Kit for TM Series AND Lot Pro Series Meyer Plows

$16.99
Bolt Kit for Angle Rams on TM Series AND Lot Pro Series Meyer Plows. Includes 4 bolts, 4 Nylock Nuts. Pivot bar end bolts are longer than A frame end bolts.