Smith Brothers Services, LLC

thumb_15105555_M2269X-ORING.JPG

O Ring for Meyer Plow Side Harness (22692, 22694, 22696)

$2.00
O Ring for Meyer Plow Side Harness (Harness 22692 for E-58H / E-72, 22694 for Xpress Plow E-68, 22696 Super V Plows (V-70/V-71). Seals plug in truck side harness. Also stops plug from wiggling causing red monitor light to come on and plow stops working.
thumb_15105578_SBS-DECAL.jpg

Smith Brothers Services Oval Decal

$3.00
Smith Brothers Services Oval Decal. Ships free in an envelope with a stamp on it :) or we can toss it in with your other parts. Ruler not included. Decal approx: 4" X 6".
thumb_15105558_drive-pro-sos-lift-arm-bolt.jpg

Meyer Drive Pro Lift Ram Top Bolt w/ Lock Nut

$4.99
Replaces existing Clevis Pin and Hairpin on Meyer Drive Pro SOS (or Cotter on E-72 units), includes Lock Nut.
thumb_15104953_E-60-tool.jpg

E-60 Pump Special Pump Tool

$5.00
This tool is used to hold the Pump Check Valve in place when installing the E-60 Pump back into the E-60 Housing.
thumb_15105260_IMG_4017.JPG

Crankstand Chain for EZ Plus and MDII plows (also for 2012 Drive Pro 6'8" plows)

$5.00
We put this little kit together to replace the weak or rusted, or even broken chain on your Meyer Plow Crankstand. For the past few years the chain has been made out of aluminum. I have broken it showing customers how to mount their plows see full Desc
thumb_15105615_IMG_9726.JPG

Meyer Nite Saber II Nite Saber III Low Beam Bulb Retainer Clip (STAINLESS)

$5.99
Meyer Nite Saber II Nite Saber III Low Beam Bulb Retainer Clip made out of Stainless Steel. Open up your light, yours may be about to crumble. Replace your mild spring steel with this STAINLESS one.
New
thumb_15105123_36cable.JPG

Power Wire - Battery to Solenoid 24"

$8.00
Power Wire from Battery to motor Solenoid under hood. 6 gauge wire, same as OEM. This wire is 24" long, and has solid copper lugs with a 5/16" hole in each lug. See Related Items for 36" wire, and welding cable upgrade in 24" and 36".
thumb_15105359_IMG_6468.JPG

7 Way Flat Trailer Plug Cap (Also fits Meyer Universal Round Plow Side Harness

$9.99
We searched high and low for a product like this. We could not find one, so we made our own. After repairing WAY too many 7 Way Flat Trailer Plugs due to them laying exposed to the weather when not connected, often just "laying in the dirt", we sought...
thumb_15105556_meyer-drive-pro-sos-crankstand-snubber2.jpg

Snubber for top of Meyer Crankstand

$9.99
Over the years we have had a problem with some vehicles, where the Lift Frame would have to come down too far to rest on the top of the Crankstand. On some EZ Plus mounts (mostly Ford Superduty) when the Lift Frame was sitting on the top of the Crankstand
thumb_15105557_sos-cover-bolts-2.JPG

Meyer SOS (Standard Operating System) Pump Cover Bolts and Washers (STAINLESS)

$9.99
Includes (4) Stainless Steel Bolts and (4) Stainless Steel Washers. Fit ALL Meyer SOS plows. Scroll through images of product.
thumb_15105505_IMG_2733.JPG

Meyer Crossover Relief Valve Removal Tool

$10.00
Tool used to remove the 15606 Crossover Relief Valve used on the E-47, E-57, and E-60. 5 are pictured, you are buying ONE OF THEM. Made of stainless steel, very durable. I have removed hundreds of them with the same tool in the shop. Never had to modify,
thumb_15105126_36cable.JPG

Power Wire - Battery to Solenoid 24" Welding Cable

$18.00
Power Wire from Battery to motor Solenoid under hood. 2 gauge wire, which is two sizes up from OEM, but this is WELDING CABLE. This wire is 24" long, and has solid copper lugs with a 5/16" hole in each lug. It is an upgrade from OEM. See Related Items for
thumb_15105588_IMG_6536.JPG

Meyer Toggle Switch Controls Connectors (Repair or Convert)

$19.99
Meyer Toggle Switch Controls Connectors (Repair or Convert). (2) Connectors for Meyer Toggle Switch Controls, and (8) Terminals. Repair your damaged harness, convert a harness, or build your own harness.
thumb_7004_pivot-tubes.jpg

Meyer Pivot Tubes (Sleeves) Pair

$24.99
1-31-21**** BACKORDERED*** Pair of Pivot Tubes fits ST and C Series plow Sector. MUST BE WELDED IN. Read FULL Description. We make these in house. Click on Related Tab for C Series Rib Pivot tubes and OEM Meyer version of this part. Same part as 07004, ex
thumb_15105070_photo-not-available.jpg

One Year Listing in the Snowplowing-Contractors.com - Directory (RENEWAL ONLY)

$25.00
SORRY! We are no longer offering listings, or maintaining the listings.
thumb_15105124_36cable.JPG

Power Wire - Battery to Solenoid 36" Welding Cable

$27.00
Power Wire from Battery to motor Solenoid under hood. 2 gauge wire, two sizes up from OEM except this is also WELDING CABLE. This cable is 36" long, and has solid copper lugs with a 5/16" hole in each lug. See Related Items for 24" wire, and welding cable
thumb_15105154_e-47-dvd-front-cover.jpg

Rebuilding A Meyer E-47 - Step By Step DVD

$29.99
We chose to put these videos on a DATA DVD. It MUST be played on a computer. It will not play in a conventional DVD player hooked up to a TV. The reason we chose this route is because at just over 5.5 hours in length, it would require 3 DVDs to fit it al
thumb_15105308_E-60-DVD-Cover.jpg

Rebuilding A Meyer E-60 - Step By Step DVD

$29.99
We chose to put these videos on a DATA DVD. It MUST be played on a computer. It will not play in a conventional DVD player hooked up to a TV. The reason we chose this route is because at just over 5.5 hours in length, it would require 3 DVDs to fit it...
thumb_15105423_SBS-E-58H-E-47H.jpg

Meyer E-58H to E-47H Wiring Adapter - Smith Brothers EXCLUSIVE

$39.50
This is a Smith Brothers exclusive, I know because I just made it. Meyer does NOT offer this backwards compatible adapter. This adapter allows you to run an E-47H in place of an E-58H. See full Desc.
thumb_15104746_meyer-touchpad-harness-pigtail.jpg

Meyer Touchpad Harness Conversion Pigtail

$39.99
Meyer Touchpad Harness Conversion Pigtail. Convert your Slik Stik or Toggle Harness into a Touchpad Harness with this pigtail adapter. Wiring diagram and instructions included.
thumb_15105589_IMG_6546.JPG

Adapter Harness to Replace Meyer Touchpad with Toggle Controls

$39.99
Adapter Harness to Replace Meyer Touchpad with Toggle Controls. We make these in the shop. M15478-pigtail pictured as well but not included. Click on Related tab for more connector options.
thumb_15105207_M08346.jpg

Mounting Carton 17000 Hardware Bag for 1972 - 1986 Jeep CJ

$69.00
No Longer Available from Meyer. We put these kits together ourselves. It is the hardware required to install Mounting Carton 17000 on the vehicle. See BOTH photos.
thumb_15105584_toggles-to-touchpad.jpg

Toggles for use with Meyer Touchpad Harness

$99.99
***BACKORDERED 12-2-20*** We have all been there with a Touchpad. The red overload light keeps coming on, and you have to reset the controller, but it keeps happening. This is because the Touchpad is constantly sensing amp draw and continuity of each func
thumb_15105316_SB60HOSEKIT.JPG

Hose Kit for Meyer E-47 and E-60 UPGRADE

$129.00
***BACKORDERED 12-18-20*** Hose Kit for Meyer E-47 / E-60. This kit will work with any E-47 or E-60 and allow you to replace what you have, or upgrade from the old design that had the 90° Swivel Fittings. See FULL DESC...
thumb_15105559_meyer-drive-pro-sos-upgrade-kit.jpg

Meyer Drive Pro SOS (Standard Operating System) Upgrade Kit

$129.99
We decided to offer an upgrade kit for the Drive Pro SOS. What does it include? Click on the full description for a list.