MADE IN THE USA

thumb_15105516_IMG_3004.JPG

7 Compartment Plastic Storage Box - Approx. 5" x 7" x 1.75"

$3.00
7 Compartment Plastic Storage Box. Made in the USA. Perfect for small parts, fishing lures, hobbies and crafts. Box measures about 7" x 5" by 1.75" deep.
thumb_15104786_A-coil.jpg

"A" Coil (5/8") for Meyer Plow Pumps - Fits E-46 - E-60 15659

$19.99 $24.99
"A" Coil (5/8") for Meyer Plow Pumps - Fits E-46 (with updated 5/8" Valve), E-47, E-57, and E-60. Made in the USA.
thumb_15104789_a-valve38-th.jpg

"A" Valve (3/8") For Meyer E-46 and E-47 plow pumps

$35.99
"A" Valve for older Meyer E-46 and E-47 plow pumps. It has a 3/8" stem diameter. MADE IN USA. The A Valve controls "Lower and Float".
thumb_15104787_a-valve58-th.jpg

"A" Valve (5/8") for Meyer E-46 - E-60 Pumps

$39.99 $76.40
This "A" Valve fits Meyer E-46, E-47, E-57, and E-60 plow pumps. The A Valve controls "Lower and Float".
thumb_15104796_B-valve-th.jpg

"B" Valve for Meyer E-47 - E-60

$49.99
"B" Valve for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN THE USA. This is an aftermarket valve, and the coil will not cover the nut part of the valve. This is normal and will not affect operation in any way! Ball & Spring under Valve are NOT part of V
thumb_15105185_Nov10-_11-.jpg

Angle Block Bolts (Hold PA Block to Sump Base) 4 Bolts

$6.00
(4) PA Block bolts. Hold PA Block to Sump Base on E-47, E-57, E-60, E-78, E-58, including H Models. The standard among high-strength fasteners, these screws are stronger than Grade 8 steel screws. They have a minimum tensile strength of 170,000 psi. and..
thumb_15104795_B-coil.jpg

B Coil for Meyer E-47 - E-57 - E-60 Plow Pumps

$22.99 $24.99
B Coil (Red Wire, controls Raise) for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN USA. Engraved SMITH BROTHERS on top.These are made by the same Vendor Meyer used to get all their coils from for the E-47/57/60.
thumb_15104797_M15430.jpg

C Coil for Meyer E-47 - E-60 Plow Pumps

$24.99 $29.99
C Coil for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN USA. The C Coil controls the C Valve, which controls Right Angle. SMITH BROTHERS engraved on top of Coil. MADE IN THE USA. These are made by the same Vendor Meyer used to get all their coils from
thumb_15105077_photo-not-available.jpg

Coil & Valve Package Deal for Meyer E-47, E-57, and E-60 pumps

$199.00
Package Deal on A Coil, A Valve, B Coil, B Valve, C Coil, C Valve for Meyer E-47, E-57, and E-60 pumps. Save over $20 compared to buying parts individually!
thumb_15105202_photo-not-available.jpg

Meyer E-60 Gear Pump Mounting Bolt Star Washers (2)

$1.00
Meyer E-60 Gear Pump Mounting Bolt Star Washers (2). These two Star Washers go under the heads of the Gear Pump Mounting Bolts.
thumb_15105201_photo-not-available.jpg

Meyer E-60 Gear Pump Mounting Bolts (2)

$4.50
Meyer E-60 Gear Pump Mounting Bolts (2). These two Bolts hold the Gear Pump to the Sump Base Casting.
thumb_15105200_photo-not-available.jpg

Meyer E-60 Side Cover / Motor Mounting Plate Bolts

$6.99
Meyer E-60 Motor Mounting Plate (Side Cover) Allen head bolts (2).
thumb_15105197_photo-not-available.jpg

Meyer PA Block O Rings

$2.50 $8.97
Meyer PA Block O Rings (Pack of 3). For E-47, E-57, E-60, E-58H. Note: E-60 only uses 2 of these and a third one that is larger. Click on "Related" for E-60 third O Ring.
thumb_15104990_aug-1--10_009.jpg

Tank O Rings Fit Meyer E-47 - E-88 models

$2.00
Tank O Rings fit all Meyer plow pumps except new V-70. Sold in pairs. Penny in photo is for size reference only.
thumb_15105368_Hopkins-48735-set.JPG

Trailer Plug Dust Cover Set (Hopkins 48735) for 4 pin Flat Trailer Plugs (Set of (2))

$1.00 $2.89
Set of two (2) Dust Covers (Hopkins 48735) for 4 pin Flat Trailer Plugs. Fits Truck Side or Trailer Side. Includes packet of dielectric grease to protect terminals from corrosion.