Specials

Bolt- 5/8" x 3" Grade 5

This is the older style 3/8" Coil for E-46 and E-47 Meyer plow pumps. The A Coil controls "Lower and Float". Made in the USA.

"A" Coil (5/8") for Meyer Plow Pumps - Fits E-46 (with updated 5/8" Valve), E-47, E-57, and E-60. Made in the USA.

This "A" Valve fits Meyer E-46, E-47, E-57, and E-60 plow pumps. The A Valve controls "Lower and Float".

Fits 22691 and 22691S Universal Harness. Does NOT include Universal Harness.

****SOLD OUT ***** REPLACED BY 22691S (Split Harness). We found a dusty box with (6) of these on the shelf. SPECIAL CLEARANCE PRICING ON THESE (6) WHEN THEY ARE GONE THAT IS IT.

***SOLD OUT*** Meyer Drive Pro Mounting Carton 18514 for 2010 & up Ford Ranger. (2) Available on Overstock / Clearance 5-1-19.Save $190.90!

B Coil (Red Wire, controls Raise) for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN USA. Engraved SMITH BROTHERS on top.These are made by the same Vendor Meyer used to get all their coils from for the E-47/57/60.

Bolt- 5/8" x 2-3/4" Grade 5

Bolt- 5/8" x 3-1/2" Grade 5

Bolt- 5/8" x 3-1/4" Grade 5

Brace Bar - Used on Meyer EZ Classic Mounting Cartons 17117, 17116, 17103, 17104, and Diamond 81025. Fits right or left side. Sold EACH.

Brace LH for Meyer Mounting Carton 17089. BRACE ONLY.

C Coil for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN USA. The C Coil controls the C Valve, which controls Right Angle. SMITH BROTHERS engraved on top of Coil. MADE IN THE USA. These are made by the same Vendor Meyer used to get all their coils from

Cotter Pin 1/4" x 2"

Dual Acting Angle Cylinder for power angle Home Plow by Meyer.

Large 5 ounce Tube of Professional Blend Dielectric Grease for ALL Plow electrical connections, bulbs, trailer plugs, etc.

Draw Bar Lock BDL253 helps keep trailer secure when not attached to truck. Blocks Lunette Eye access. Accepts up to 1/2" Padlock.

Here we put together a kit, it is actually about (5) Hardware Kits worth in a 7 Compartment Plastic Storage Box. The combination of Hardware in this box covers all Meyer E-47, E-57, and E-60 units. We never offered Hardware .....

Genuine Meyer A Valve Cavity Plug 15966 used when replacing the original PA Block on an E-47, 57, or 60 with an updated PA Block such as 16016. Updated 16016 PA Block has the A Valve in it, so the original A Cavity in the Sump Base needs to be plugged. Us

This is the replacement 16016 PA Block for the E-58H with 15612. It includes the Coils and Valves, exactly as pictured. It replaced the obsolete 15612. This is the current design used on the E-58H. It is exactly as pictured, and does not include Couplers.

Genuine Meyer E-60 Cylinder Update Kit. Increases Cylinder diameter to 1-3/4". Includes Seals, Cylinder, Piston, Follower. Pump pressure must be reset to 2000psi after install. DOES NOT FIT E-60H.

EZ Classic Lift Frame for Fullsize Trucks. Cannot ship to PO Boxes.

EZ Plus Lift Frame Hardware Bag. Pins, Springs,, Bolts, Nuts. etc. See diagram for full list of parts included.

EZ Plus MDII Mounting Carton 17174 for 2011 & up Chevy / GMC 2500 / 3500. Includes brackets and hardware as pictured. Does NOT include Universal EZ Plus or MDII Clevis. USE EZ MATCH ON MEYER WEB SITE TO VERIFY FIT. www.meyerproducts.com