Smith Brothers Services, LLC

Smith Brothers Services Oval Decal. Ships free in an envelope with a stamp on it :) or we can toss it in with your other parts. Ruler not included. Decal approx: 4" X 6".

5,000 PSI Liquid Filled Pressure Gauge, includes adapter to screw in to High Pressure Port on Meyer E-47, E-57, E-58H, and E-60 pumps. Also fits H Models. Adapter will not fit older E-47 units with 5/8" Drain Plugs. It can still be used on them, but must.

Adapter Harness to Replace Meyer Touchpad with Toggle Controls. We make these in the shop. M15478-pigtail pictured as well but not included. Click on Related tab for more connector options.

This tool is used to hold the Pump Check Valve in place when installing the E-60 Pump back into the E-60 Housing.

Meyer 22154 Touchpad 24" Extension cord. This is just a 24" extension cord to allow the controller to be where you want it in the cab. 6 pin rectangular M/F ends. Made to order here in the shop.

Tool used to remove the 15606 Crossover Relief Valve used on the E-47, E-57, and E-60. 5 are pictured, you are buying ONE OF THEM. Made of stainless steel, very durable. I have removed hundreds of them with the same tool in the shop. Never had to modify,

Meyer Nite Saber II Nite Saber III Low Beam Bulb Retainer Clip made out of Stainless Steel. Open up your light, yours may be about to crumble. Replace your mild spring steel with this STAINLESS one.

Meyer Plow Pistol Grip and Touchpad Test Box (Diagnostic Tool). I made the first one on 10-3-2007. I have been using it in the shop since then. BUILT TO ORDER. **12-2018 due to lack of interest we have discontinued this item.

Meyer Toggle Switch Controls Connectors (Repair or Convert). (2) Connectors for Meyer Toggle Switch Controls, and (8) Terminals. Repair your damaged harness, convert a harness, or build your own harness.

Meyer Toggle Switch Controls Connectors with Pigtail. Use to replace damaged connectors on back of switches, or convert a Slik Stik or Touchpad Harness to use Toggles instead. The old Dodge Sno Commanders had Chrysler connectors and switches. Replace with

SORRY! We are no longer offering listings, or maintaining the listings.

Discontinued. We have all been there. Two guys struggling with a tailgate spreader, you get it in the hitch, then one guy is on his knees while the other is moving the spreader trying to get the pin hole lined up. This new product solves that problem once

We have all been there with a Touchpad. The red overload light keeps coming on, and you have to reset the controller, but it keeps happening. This is because the Touchpad is constantly sensing amp draw and continuity of each func