Drive Pro Plow Parts

Drive Pro Plow Parts
thumb_15105080_10in-ram.jpg

Angle Ram 1.5" x 10" Cross Drilled for Meyer ST and TM, Lot Pro, and Drive Pro Series Plows

$109.00
Aftermarket power angle ram for Meyer ST and TM Series plows. Measures 10" from weld to weld on cylinder. Also fits some C Series plows. Port is SAE thread and comes with 1/4" NPT adapter. READ FULL DESC
thumb_15105606_M19945.jpg

Drive Pro Clevis Spacer Plate 19945 used with some EZ Plus Mounts

$26.00
Drive Pro Clevis Spacer Plate 19945 used with some EZ Plus Mounts. Some require these and 19948 Brackets. SOLD EACH.
New
thumb_15105381_M22691S.jpg

Genuine Meyer 22691S - 1 Piece ROUND Plug SPLIT Harness for EZ Plus mount with E-58H - E-88 pump TRUCK SIDE

$249.00 $267.10
Genuine Meyer 22691S Universal Truck Side Harness - This is a new design that came out in 2013 and was standard up to 2017. OEM Meyer Truck Side plug and SPLIT wiring harness for EZ Plus mounting with E-58 - E-88 pumps. THIS IS THE TRUCK SIDE ONLY. Power,
thumb_15105223_Jan--_31-12-_003.jpg

Genuine Meyer E-58H Hose 22461 (Hose Ass'y. SAE 1/4 x 38" Lg. M-6 Faceseal)

$35.50
Genuine Meyer E-58H Hose 22461 (Hose Ass'y. SAE 1/4 x 38" Long M-6 Faceseal). Standard hose included with E-58H Hydraulic Carton. Sold individually.
thumb_15105304_22690DC.JPG

Genuine Meyer EZ1 Pistol Grip Controller 22690DC

$269.00 $318.50
Genuine Meyer EZ1 Pistol Grip Controller 22690DC. The DC stands for "Double Click". when the angle left button is double clicked, the plow will fully angle left, the same for up, right and down. Double clicking on down will put the plow right into float m
thumb_15104735_fillplugT.jpg

Genuine Meyer Fill Plug / Vent for all Meyer plow pumps (Part# 08473)

$6.99
Genuine Meyer Fill Plug / Vent for all Meyer plow pumps. OEM Meyer part# 08743. MEYER units are E-46, 47, 57, 58H, 60, 61H, 68, 78, and 88. Bucher (Monarch) units are V-70, E-70, V-71, E-72, E-73. This plug will not fit Bucher.
thumb_15105521_M19943.jpg

Meyer Drive Pro 1/2 Ton Universal Clevis 19943

$269.99 $280.13
Meyer Drive Pro 1/2 Ton Universal Clevis 19943. Used to mount a Drive Pro Single Pull 7.5' plow on a 1/2 ton truck. Can also be used to gain 2" of drop on a lifted vehicle such as a Jeep Wrangler TJ or JK.
thumb_15105329_M19709.JPG

Meyer Drive Pro 6' 8" Jack Leg - 19709 **********OBSOLETE**********

$40.00
****OBSOLETE**** 3 in stock*****Jack Leg 19709 that drops down on Meyer Drive Pro 6' 8" Plows. ***WILL NOT FIT ANY OTHER MEYER PLOW***
thumb_15105604_M19948.jpg

Meyer Drive Pro Half Ton Mount Clevis Support Bracket 19948

$34.00
Meyer Drive Pro EZ Plus Mount Clevis Support Bracket 19948. Used on some EZ Plus Mounting Cartons when using a Drive Pro Clevis to install a Drive Pro Clevis on a 1/2 ton truck. Scroll through all the pictures.
New
thumb_15105605_IMG_8681.JPG

Meyer Drive Pro Lift Frame Hardware Bag 08142 (ORIGINAL PART for Drop Leg) OBSOLETE

$69.99 $136.87
Meyer Drive Pro Lift Frame Hardware Bag 08142. This is the ORIGINAL PART. There are 13 pieces in all. The later version of this part is for plows using a Crankstand, any only have 9 pieces total. IF you have the Jack Leg then this is the part you want. IF
New
thumb_15105515_M18504.jpg

Meyer Drive Pro Mounting Carton 18504 - 2004 & up Colorado / Canyon

$389.00 $429.99
Meyer Drive Pro Mounting Carton 18504 - 2004 & up GM Colorado / Canyon. Universal Clevis (highlighted in green) is NOT part of any Mounting Carton.
thumb_15105055_M18507.jpg

Meyer Drive Pro Mounting Carton 18507 fits 2007 & up Jeep Wrangler JK

$389.00 $429.99
Meyer Drive Pro Mounting Carton 18507 for 2007 - 2018 Jeep Wrangler JK. Universal Clevis is NOT INCLUDED.
thumb_15105054_M18509.JPG

Meyer Drive Pro Mounting Carton 18509 fits 1997 - 06 Jeep Wrangler TJ

$389.00 $429.99
Meyer Drive Pro Mounting Carton 18509 for 1997 - 2006 Jeep Wrangler TJ. Universal Clevis is NOT INCLUDED.
thumb_15105549_M18502.jpg

Meyer Drive Pro Mounting Carton 2005 & up Tacoma 18533

$379.00 $390.90
Meyer Drive Pro Mounting Carton 18533 for 2005 & up Toyota Tacoma. Universal Clevis is NOT INCLUDED.(18533 replaced 18502 in 2016)
thumb_15105608_M19781.jpg

Meyer Drive Pro Pin Bar 19781 PIN PULL WELDMENT

$69.00 $84.24
Genuine Meyer 19781. We call it a Pin Bar, Meyer calls it a PIN PULL WELDMENT. It is the flat bar with the two pins attached. We include a new spring and cotter pin to make installation easier. We have a limited number of these on hand at this low price!
New
thumb_15105390_M19836.JPG

Meyer Drive Pro Universal Clevis 19836

$199.00 $219.68
Meyer Drive Pro Universal Clevis 19836 ONLY. For mounting Drive Pro Single Handle Pull plows. It is not included in Meyer Mounting Cartons and must be purchased separately.
thumb_15105262_M15630.jpg

Meyer E-58H Cover 15630 (also fits E-57H with some trimming required)

$44.99
Meyer E-58H Hydraulic Unit Cover 15630. Will also fit Meyer E-57H with some minor trimming for the different coupler configuration on the E-57H. INCLUDES Strap (M15631) to secure Cover to unit.
thumb_15104725_09124_th.jpg

Meyer OEM Trip Spring Eye 09124C

$11.25 $12.79
Genuine Meyer Trip Spring Eye Bolt 09124C.
thumb_15105235_M10853.jpg

Meyer TM / STL Shoe (10853 replaced by 09127)

$59.00 $67.33
A single shoe that fits the TM and STL Series plows, as well as Drive Pro Series and Home Plow up to 6' 8". Includes Washers and Lynch Pin. Updated part number is M09127.
thumb_15105607_IMG_8689.JPG

Trip Bumper Drive Pro Plows (PAIR of 22686)

$15.00
Trip Bumper Drive Pro Plows (PAIR of 22686). Sold in pairs, only fits Drive Pro Moldboards.
New