Meyer TM Series Plows

Bolt Kit for Angle Rams on TM Series AND Lot Pro Series Meyer Plows. Includes 4 bolts, 4 Nylock Nuts. Pivot bar end bolts are longer than A frame end bolts.

Bushing for TM Series and Drive Pro 6' 8" Pivot Bar. Must be welded in. REQUIRES WELDING. Has a 5/8" diameter hole in it.

Moldboard Hardware Bag for TM Series Plows. Includes 2 Pivot Bolts with grease fittings, and Center Pivot Bolt with grease fitting, Trip Spring Eyes, Mounting Pins with Lynch Pins, 2 Angle Ram Bolts that attach to Pivot Bar.

Mounting Bolt kit for EZ Custom, and EZ Classic Mountings, fits E-47, E-57, and E-60 with pictured Lift Arm. Also fits Meyer Drive Pro 6'8". LIFT ARM NOT INCLUDED.

A single shoe that fits the TM and STL Series plows, as well as Drive Pro Series and Home Plow up to 6' 8". Includes Washers and Lynch Pin. Updated part number is M09127. You are buying a single 09127.

Hinge Connector (Ear) for TM Series Meyer plow A Frames. Requires welding to install or replace. Will not fit ST plows.

Hose Guard for TM Series Meyer plow A Frames. Requires welding to install or replace. Will not fit ST plows. OBSOLETE from Meyer we have (4) available 5-1-19.

***OBSOLETE NO LONGER AVAILABLE*** SOLD OUT*** Outer Rib for Meyer TM Series Plow Moldboards. Fits 5, 6, and 6.5.IT IS NOT FREE YOU CANNOT ORDER IT.

Power Angle Ram Clevis for TM A Frames. MUST BE WELDED ON. Original Part# was M13578 and has been replaced by M11609.

Pivot Bolt with Grease Fitting for TM series plows. Sold EACH. Also fits Meyer Drive Pro 6'8" (which would be an upgrade from the standard Drive Pro pin). This is NOT the Center Pivot Bolt (King Bolt).

Meyer TM Plow Trip Spring Bracket L. H.

Meyer TM Plow Trip Spring Bracket R. H.

Grade 8 King Bolt with Grease Fitting for Meyer TM Series Plows. Also fits Meyer Drive Pro 6'8" upgrading from the standard King Bolt with NO grease Fitting.

Pivot Pipe for Meyer TM Series Plows. REQUIRES WELDING TO INSTALL. Price is for EACH.

Pivot Rib 12996 fits right and left side of Meyer TM Series Moldboards, 5, 6, and 6.5'.(2) LEFT AS OF 4-22-2023 when they are gone that is it. OBSOLETE NO LONGER AVAILABLE FROM MEYER.

****OBSOLETE**** NO LONGER AVAILABLE***** Meyer TM Shoe Bracket 12120

Trip Spring Clip for TM Series Meyer plow A Frames. Requires welding to install or replace.

Meyer TM-6.5 Horizontal Rib. ONLY fits TM-6.5.

Meyer TM/DP Plow Shoe Washers (9). Shoe and Pin NOT included.

Weld on to connect Lift Chain to A Frame on ST, TM, and C Series plows. NOT for MDII or EZ Plus mount plows.

OBSOLETE****This bracket attaches to the lift frame and brings out the lower pump mounting point past the bumper. For OLDER TM Mountings as pictured.

Meyer TM Plow A Frame Stop Block. Fits all Meyer TM A Frames. Must be welded on. Sold individually.

Guides for Meyer plows. Fit ST, TM, and C Series plows. Sold in pairs with hardware. They are 25" tall. They include new hardware to mount them.