Meyer Coils & Valves

Meyer Plow Emergency Repair Kit for E-47, E-57, E-60. Fits where an ordinary toolbox wont. Built-in, recessed, full-grip handle for easy portability. Roomy bulk storage area plus one small parts compartment. Built-in recessed full-grip handle. Read more..

Multiple piece Crossover Relief Valve 15606 for Meyer plow pumps. This part is no longer available from Meyer. Meyer replaced it with the one piece unit. Fits E-47, E-57, and E-60 units.

This is the older style 3/8" Coil for E-46 and E-47 Meyer plow pumps. The A Coil controls "Lower and Float". Made in the USA.

"A" Coil (5/8") for Meyer Plow Pumps - Fits E-46 (with updated 5/8" Valve), E-47, E-57, and E-60. Made in the USA.

"A" Valve for older Meyer E-46 and E-47 plow pumps. It has a 3/8" stem diameter. MADE IN USA. The A Valve controls "Lower and Float".

This "A" Valve fits Meyer E-46, E-47, E-57, and E-60 plow pumps. The A Valve controls "Lower and Float".

"B" Valve for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN THE USA. This is an aftermarket valve, and the coil will not cover the nut part of the valve. This is normal and will not affect operation in any way! Ball & Spring under Valve are NOT part of V

"C" Valve for Meyer E-47, E-57, and E-60 Plow Pumps. This is an aftermarket valve, and the Coil will not cover the hex part of the Valve. This is normal and will not affect operation in any way! The C Valve, controls Right Angle.

A Valve fits Meyer E-72 and E-58H made after August 2012

B Coil (Red Wire, controls Raise) for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN USA. Engraved SMITH BROTHERS on top.These are made by the same Vendor Meyer used to get all their coils from for the E-47/57/60.

B Valve 15117 fits Meyer E-72 and E-58H made after August 2012. "S5" & "S6" Cartridge Valve on V-70.

C Coil for Meyer E-47, E-57, and E-60 Plow Pumps. MADE IN USA. The C Coil controls the C Valve, which controls Right Angle. SMITH BROTHERS engraved on top of Coil. MADE IN THE USA. These are made by the same Vendor Meyer used to get all their coils from

C Valve for Meyer E-72, E-73 and E-58H made after August 2012. "S2", "S3", "S7" Cartridge Valve on V-70.

Package Deal on A Coil, A Valve, B Coil, B Valve, C Coil, C Valve for Meyer E-47, E-57, and E-60 pumps. Save over $20 compared to buying parts individually!

Coil fits E-58H Made after August 2012 (can be replaced with M15150). Coil "S2", "S3","S5", "S6" & "S7" on V-70.

Coil fits Meyer E-72, V-70, V-71, and Home Plow by Meyer Power Angling Unit. Also replaces 15118 used on E-58H made after August 2012. Also replaces Monarch / Bucher 00678D used on M-3319 series units used on many dump bodies

Genuine Meyer A Valve Cavity Plug 15966 used when replacing the original PA Block on an E-47, 57, or 60 with an updated PA Block such as 16016. Updated 16016 PA Block has the A Valve in it, so the original A Cavity in the Sump Base needs to be plugged.

15612 has been replaced by 16016. This is NOT FREE. See full description for a link to 16016, or type M16016 in the search box above.

Genuine Meyer 36248 Weather plug for power and ground wires when pump is removed from vehicle.

Genuine Meyer OEM B Check Valve Assembly 15959. Fits E-58H (early), E-68, E-78, E-88 Units ONLY!!!!

Genuine Meyer OEM 1 Piece Crossover Valve Assembly 15974 - Fits E-47/57/60/68/88 units. This is all Meyer offers now for the E-47, 57, and 60. It replaced the multiple piece adjustable 15606 Crossover Relief Valve. Fits E-47/57/60/68/88 units.

Brass nut for Meyer 5/8" A Valve. Fits A Valve M15660 ONLY. Meyer never offered a brass nut for this application, WE DO.

C Valve O Ring Kit for Meyer E-47, E-57, and E-60 pumps. MADE IN THE USA.

Meyer Coil with Deutch Connector 15916 (2 Wire Coil) Fits - E-58H (Original Design PA Block), E-68, E-78, E-88 units. GENUINE MEYER.

Tool used to remove the 15606 Crossover Relief Valve used on the E-47, E-57, and E-60. 5 are pictured, you are buying ONE OF THEM. Made of stainless steel, very durable. I have removed hundreds of them with the same tool in the shop. Never had to modify,