Meyer Pump Seal Kits

We chose to put these videos on a DATA DVD. It MUST be played on a computer. It will not play in a conventional DVD player hooked up to a TV. The reason we chose this route is because at just over 5.5 hours in length, it would require 3 DVDs to fit it al

Genuine Meyer E-57 Forged Elbow 22295 on Valve Block. Also found on late E-47 units and E-60 units.

(4) PA Block bolts. Hold PA Block to Sump Base on E-47, E-57, E-60, E-78, E-58, including H Models. The standard among high-strength fasteners, these screws are stronger than Grade 8 steel screws. They have a minimum tensile strength of 170,000 psi. and..

Check Ball Set - Pilot Check Ball, Pump Check Ball, B Check Ball; E-47, 57, 60. Set of the (3) Balls pictured. Other parts depicted for reference only.

Multiple piece Crossover Relief Valve 15606 for Meyer plow pumps. This part is no longer available from Meyer. Meyer replaced it with the one piece unit. Fits E-47, E-57, and E-60 units.

Here we put together a kit, it is actually about (5) Hardware Kits worth in a 7 Compartment Plastic Storage Box. The combination of Hardware in this box covers all Meyer E-47, E-57, and E-60 units. We never offered Hardware .....

Genuine Meyer E-58H Master Seal Kit. Includes a quart of oil in the box from Meyer.

E-60 Packing Washer 15691. Does NOT fit E-60H units. Does NOT fit E-60 units made after 2003.

Genuine Meyer E-47 E-57 Basic Seal Kit 15456SP - Fits E-46, E-58H, E-61, E-68, E-88 pumps too.

Genuine Meyer E-57 OEM Gear Pump Assembly 15889. This is the actual Gear Pump 15889 that sits under the motor. The motor is held onto this part with 2 screws. This is NOT a complete E-57 assembly. The Gear Pump is held onto the Sump Base with 3 nuts, on

Genuine Meyer OEM Basic Seal Kit 15707 for E-60 / E-60H units. Genuine Meyer Part.

Genuine Meyer E-72 Seal Kit 15082. This is the ONLY Seal Kit offered for the E-72. Unlike older units, there are no Valve O Ring kits offered by Meyer. These were received from Meyer in the zip lock bags as pictured.

Genuine Meyer Pair of filters 15619 for Meyer E-46, 47, 57, and 60 pumps. Including older E-46 and E-47 units that had the filter attached to the plug.

Genuine Meyer OEM Pump Strainer Screen 15326 that is inside E-46, 47, 57, 58, 68, 78, 88.

Genuine Meyer Pump Mounting Plate 15703 for Meyer E-60 and E-60H.

Genuine Meyer Pump Shaft Seal 15877- Fits E-57, E-58, E-68, E-78, E-88. The Seal goes on the actual Pump Shaft, under the motor.

Genuine Meyer Pump Shaft seal fits 1970's E-47 units. It is smaller than newer (1980's) units. See Product Images to verify this is the one you need. See Related Items for the newer one.

Genuine Meyer Seal Kit 15964C for 05877 PA Ram used on Xpress plow and others in mid 2000's. Scroll through all pics to be sure this is the one you need.

Genuine Meyer OEM Top Cap Wiper Seal 05119C with Brass insert. Fits all E- series pumps. The C in the part# stands for Clamshell Packaging.

Genuine Meyer Master Seal Kit 15051 for Meyer V-68 V Plow Pump. WILL NOT FIT ANY OTHER UNIT! Master Seal Kit M15051 includes Base Plate Seal Kit M15047, Universal Valve Block Seal Kit M15049, and Super Vee Valve Block Seal Kit M15047.

O Ring Kit for Meyer E-47, E-57, and E-60 pumps. Does NOT FIT NEW STYLE VALVES WITH 2 WIRES TO EACH COIL.

B Valve O Ring Kit fits Meyer E-47, E-57, and E-60 pumps. WILL NOT FIT NEW STYLE VALVES WITH 2 WIRES TO EACH COIL.

O Ring Kit for Meyer Crossover Relief Valve.

Meyer E-47 E-57 Basic Seal Kit 15254 - Fits E-46, E-58H, E-68, E-78, and E-88 too. MADE IN THE USA

An E-47 rebuild kit like no other! We put together the most complete rebuild kit for the E-47 Meyer Snow Plow Pump you will find anywhere.