We have (1) of these, when it is gone we will refund the purchase price to anyone that misses the last one. Rebuilt Meyer E-60 unit. Bead blasted and primed with Genuine Meyer Primer, then painted with Genuine Meyer Sno Flo Yellow. BRAND NEW: A Valve, B Valve, C Valve, A Coil, B Coil, C Coil, Crossover Relief Valve, Pilot Check Valve, Hardware Kit, Seal Kit, Guide Bushing, both Couplers, Dust Caps, Tall Elbow, Short Elbow, 2 Lug Motor, Vent. Cylinder Update Kit installed. Brass Nuts on all Coils with Neverseize on threads, capped with clear silicone, Neverseize on Motor Bolts, Ground Bolt. All threads chased with tap during rebuild. Pressure set @ 2000 psi (spec), amp draw 165 amps. All new parts have 1 year warranty. You MUST drain and flush your PA rams prior to installing this unit. You must use Meyer M1 or equivalent. Warranty does not cover abuse such as a swollen C Valve, and not draining and flushing your PA Rams. This unit is filled with Synthetic Low Temp blue hydraulic oil and ready to go. Will replace an E-47, E-57 or E-60 unit. CANNOT BE USED TO REPLACE ANY H MODEL.